Z1-PRO Technical Parameters

Stabilizer
ModelZ1-PRO
DimensionL:96mm W:88mm H:235mm
Operation current50mA-2A
Operation temperature-20C°-45C°
Run-time5h
Weight285g(Battery excluded)
Payload weight160g
Tilt axis mechanical movement range359°
Roll axis mechanical movement range80°
Pan axis mechanical movement range300°
Support Action Cameras
ModelGoPro
Maximum payload sizeH:42.3mm W:30mm

Charger
NameZhiyun Li-ion battery charger
Model18350 Li-ion battery charger
Input voltage5V
Charging current400mA
 
Battery
NameZhiyun Li-ion battery
Model18350Li-ion
Capacity900mAh
Voltage3.7V
Battery typeLi-ion
Whole battery weight21g(Single)
Charging temperature0C°-45C°
Discharge temperature-10C°-45C°
Storage temperature25C°Room temperature
maximum charging current400mA
 
Structure
Mode switch


Pan following mode is the default mode. Single press the Mode to switch pan following mode and locking mode. Double press the Mode to enter pan and tilt following mode. Single press the Mode again to go back to previous mode.

  • Pan and tilt following mode

    Roll axis is locked, tilt and pan axes rotate to follow the gimbal's movement. In this mode, long press the UP/DOWN button to adjust roll angle.

  • Locking mode

    All axes(pan, tile and roll) are locked and the gimbal faces in one direction only. In this mode, long press the UP/DOWN button to adjust tilt angle.

  • Pan following mode

    Pan axis(rotation left and right) following gimbal's movement, while the camera remains locked in tilt(up and down) and roll (level) to remain upright. In this mode, long press the UP/DOWN button to adjust tilt angle.

 

Download

 
Firmware download
  • Firmware upgrade package_V1.07 2016-08-08ZIP
  • User manual_V1.03 2016-08-08PDF